adhesive film, transp. 150µ, for digital printing

This solvent adhesion film 150µ is a bilaterally sticking adhesive film made of plasticised PVC that adheres to shining surfaces (incl. window panes, car paint) without the use of glue and that is removable. In combination with solvent inks also the printed face is adhesive; however, the film may then be applied onto glass surfaces only. It does not leave any residues. However, in combination with varnishes and synthetic materials, a compatibility test should be made before application. This adhesive film is easy to cut by means of a plotter thanks to lining with a cardboard carrier layer.

- adhesive on either side
- printed face adhesive
- reusable
- water-resistant
- can be cleaned with mild window cleansing agents

Application: indoors and outdoors
roll width: 152,4cm
+++ 3 years indoors +++
+++ 1 year outdoors +++
=============================

Glueing tools are delivered free of charge.

============================
!!! ATTENTION: Resellers please register on the bottom right under ++Important++ and ++registration of distributors++ !!!
============================

When glueing films onto windows and doors, it is much easier for you if you indicate the clear cutting dimensions 5mm smaller in width and height than what you measure from rubber to rubber. The film then has a 2.5mm circumferential clearance to the rubber or silicone joint. Should you require a free-of-charge film sample on approval, please send us an email.

NOTICE: The shipping charges comprise freight charges and film packaging! Entire rolls are excluded from free-of-charge clear cutting !!