chrome-/mirrorfilm ASLAN CA 23

Self-adhesive metal effect film ASLAN CA23 for high-quality and noble lettering and logos. The film on its glue-covered side is also highly glossy and thus also suited for mirror-inverted lettering on the inside of shop windows. Free-of-charge glueing tools. The film on its glue-covered side is also highly glossy and thus also suited for mirror-inverted lettering on the inside of shop windows. Free-of-charge glueing tools. Thanks to the well-matched material structure the films are suited for computer-controlld manufacture of lettering, logos etc.

Application: indoors and outdoors
roll width 125cm
+++ warranty outdoors min. 2 years +++
==============================

NOTICE: The film should not be stuck onto gassing surfaces such as untempered acrylic glass or translucent pressure cloths.

Glueing tools are delivered free of charge. Kindly order mounting concentrate separately. In order to avoid colour changes of the glue on the adhesive film side and to guarantee optimum adhesion, we therefore advise you against using a solution made from detergents and water. See the sticking-on instructions at the lower end of this article description.

============================
!!! ATTENTION: Resellers please register on the bottom right under ++Important++ and ++registration of distributors++ !!!
============================

When glueing films onto windows and doors, it is much easier for you if you indicate the clear cutting dimensions 5mm smaller in width and height than what you measure from rubber to rubber. The film then has a 2.5mm circumferential clearance to the rubber or silicone joint. Should you require a free-of-charge film sample on approval, please send us an email.

Please use our mounting fluid, since contamination with detergents and water can give rise to colour changes of the glue!

PLEASE NOTE: The shipping cost includes freight charges and film packaging ! Entire rolls are excluded from free-of-charge clear cutting !!